S6720-52X-PWH-SISpecification
|
Switching Capacity |
2.56 Tbit/s |
Forwarding Performance |
480 Mpps |
Fixed ports |
48x100M/1G/2.5G/5G/10G
Base-T Ethernet ports,
4x10GE SFP+
|
Extended slots |
Not supported |
MAC address table |
32K
MAC address learning and aging
Static, dynamic, and blackhole MAC address entries
Packet filtering based on source MAC addresses
|
VLAN features |
4K VLANs
Guest VLAN and voice VLAN
VLAN assignment based on MAC addresses, protocols, IP subnets, policies, and ports
VLAN mapping
Super VLAN
Basic QinQ and selective QinQ
|
IPv4 routing |
Static routing, RIPv1, RIPv2, ECMP, URPF, OSPF, IS-IS, and BGP
VRRP
Policy-based routing
Routing policies
|
IPv6 routing |
Static routing
RIPng
OSPFv3
BGP4+
ISISv6
|
IPv6 features |
Neighbor Discovery (ND) and ND snooping
IPv6 Ping
VRRP6
DHCPv6 snooping, DHCPv6 server, and DHCPv6 relay
MLDv1 and MLDv2
PIM-DM for IPv6
PIM-SM for IPv6
6 Over 4 tunnels
|
Multicast |
IGMP V1/V2/V3 snooping
Fast leave
IGMP snooping proxy
MLD snooping
Port-based multicast traffic suppression
Inter-VLAN multicast replication
Controllable multicast
IGMP v1/v2/v3
PIM-SM and PIM-DM
Multicast Source Discovery Protocol (MSDP)
Multicast routing policies
|
QoS/ACL |
Traffic classification based on ACLs
Traffic classification based on outer 802.1p fields, inner VLAN IDs, outer VLAN IDs, source MAC addresses, and Ethernet types
Access control after traffic classification
Traffic policing based on traffic classifiers
Re-marking based on traffic classifiers
Class-based packet queuing
Associating traffic classifiers with traffic behaviors
Rate limiting on inbound and outbound ports
Traffic shaping based on ports and queues
Tail drop
Priority Queuing (PQ)
Deficit Round Robin (DRR)
PQ + DRR scheduling
Weighted Round Robin (WRR)
PQ + WRR scheduling
|
Reliability |
STP (IEEE 802.1d), RSTP (IEEE 802.1w), and MSTP (IEEE 802.1s)
BPDU protection, root protection, and loop protection
RRPP ring topology and RRPP multi-instance
Smart Link tree topology and Smart Link multi-instance, providing millisecond-level protection
switchover
Smart Ethernet Protection (SEP)
G.8032 Ethernet Ring Protection Switching (ERPS)
BFD for OSPF, IS-IS, VRRP, and PIM protocols
Enhanced trunk (E-trunk)
|
Security features |
Defense against DoS, ARP, and ICMP attacks
Binding of the IP address, MAC address, port number, and VLAN ID of a user
Port isolation, port security, and sticky MAC
MAC-Forced Forwarding (MACFF)
Limit on the number of learned MAC addresses
IEEE 802.1X authentication, MAC address authentication, Portal authentication, and hybrid
authentication
Authentication methods, including AAA, RADIUS, and HWTACACS
CPU defense
MACSec
|
Super Virtual Fabric (SVF) |
SVF Parent and Client |
|
Management and maintenance
|
iStack (using service ports as stack ports)
Virtual Cable Test (VCT)
Ethernet OAM (IEEE 802.3ah and 802.1ag)
SNMPv1/v2c/v3
RMON
Web-based network management system and relevant features
System logs and multi-level alarms
GVRP
MUX VLAN
sFlow
Hypertext Transfer Protocol Secure (HTTPS)
SSH1.5/SSH2
|
|
Operating environment
|
Working temperature: 0–1800 m, 0–45°C; 1800–5000 m, the highest operating temperature reduces
by 1°C every time the altitude increases by 220 m.
Relative humidity: 5%–95% (noncondensing)
|
Input voltage |
AC:
• Rated voltage range: 100 V to 240 V AC, 50/60 Hz
• Maximum voltage range: 90 V to 264 V AC, 47/63Hz
DC:
• Rated voltage range: –48 V to –60 V DC
• Maximum voltage range: –36 V to –72 V DC
|
Dimensions (W x D x H, mm) |
442 x 507 x 44.4 |
Height |
1 U |
Typical power consumption |
159.5W |
Maximum power consumption (W) |
• 650W DC without PD: 207.36W
• 1150W AC /1000W AC (without PD): 236.8W
|
