48 x 10/100/1,000 Base-T Ethernet ports, 4 x 10 GE SFP+ ports
48 x 10/100/1,000 Base-T Ethernet ports, 4 x 10 GE SFP+ ports
Power Supply
AC
AC
PoE
Not supported
Supported
Forwarding Performance
132 Mpps
132 Mpps
Switching Capacity
256 Gbit/s
256 Gbit/s
Power Consumption
< 61W
< 479.3W (PoE: 370W)
S5700-52X-PWR-LI-AC Specification
Fixed port
48 × 10/100/1000Base-T, 4 × 10GE SFP+
MAC address table
IEEE 802.1d compliance
MAC address learning and aging
Static, dynamic, and blackhole MAC address entries
Packet filtering based on source MAC addresses
MAC address entries: 16K
VLAN
4K VLANs
Guest VLAN and voice VLAN
GVRP
MUX VLAN
VLAN assignment based on MAC addresses, protocols, IP subnets, policies, and ports
1:1 and N:1 VLAN Mapping
Ring protection
RRPP ring topology and RRPP multi-instance
Smart Link tree topology and Smart Link multi-instance, providing the millisecond-level protection switchover
SEP
ERPS(G.8032)
STP, RSTP, and MSTP
BPDU protection, root protection, and loop protection
BPDU Tunnel
Reliability
Ethernet OAM (IEEE 802.3ah and 802.1ag)
ITU-Y.1731
DLDP
LACP
MPLS features
MPLS L3VPN
MPLS L2VPN(VPWS/VPLS)
MPLS-TE
MPLS QoS
IP routing
Static routing
IPv6 features
Neighbor Discovery (ND)
Path MTU (PMTU)
IPv6 ping, IPv6 tracert, and IPv6 Telnet
ACLs based on the source IPv6 address, destination IPv6 address, Layer 4 ports, or protocol type
MLD v1/v2 snooping
Multicast
IGMP v1/v2/v3 snooping and IGMP fast leave
Multicast forwarding in a VLAN and multicast replication between VLANs
Multicast load balancing among member ports of a trunk
Controllable multicast
Port-based multicast traffic statistics
QoS/ACL
Rate limiting on packets sent and received by an interface
Packet redirection
Port-based traffic policing and two-rate three-color CAR
Eight queues on each port
WRR, DRR, SP, WRR+SP, and DRR+SP queue scheduling algorithms
Re-marking of the 802.1p priority and DSCP priority
Packet filtering at Layers 2 through 4, filtering out invalid frames based on the source MAC address, destination MAC address, source IP address, destination IP address, TCP/UDP port number, protocol type, and VLAN ID
Rate limiting in each queue and traffic shaping on ports
Security
User privilege management and password protection
DoS attack defense, ARP attack defense, and ICMP attack defense
Binding of the IP address, MAC address, interface, and VLAN
Port isolation, port security, and sticky MAC
MFF
Blackhole MAC address entries
Limit on the number of learned MAC addresses
802.1x authentication and limit on the number of users on an interface
AAA authentication, RADIUS authentication, HWTACACS authentication, and NAC
-Maximum voltage range: 90 V to 264 V AC, 47/63 Hz
Dimensions (W x D x H)
442 x 310 x 43.6 mm
Powerconsumption
<479.3W (PoE: 370W)
The S5700-52X-PWR-LI-AC gigabit enterprise switch is next-generation energy-saving switch developed by Huawei. With 48 10/100/1,000 Base-T Ethernet ports and 4 10 GE SFP+ ports, it provides a large switching capacity and high-density GE ports to implement quick upstream transmissions, widely used in various application scenarios like enterprise park access, convergence, gigabit access of data center application scenarios. The unique PoE function has satisfied the demand of higher power transmission and farther driving distance, ensuring the smoothness and stability of video transmission. Using advanced energy conservation technology, the S5700-52X-PWR-LI-AC is dedicated to helping enterprise customers build a reliable and secure next-generation IT network.
Quick Specs
Figure 1 shows the appearance of Huawei S5700-52X-PWR-LI-AC.
Table 1 shows the Quick Specs.
Product Code
S5700-52X-PWR-LI-AC
Fixed Ports
48 x 10/100/1,000 Base-T Ethernet ports, 4 x 10 GE SFP+ ports
MAC Address Table Size
16 MAC
Voltage Required
AC
Rated voltage range: 100V to 240V AC, 50/60 Hz
Maximum voltage range: 90V to 264V AC, 47/63 Hz
Power Device
AC power supply, supporting RPS
PoE
PoE+
Power Consumption Operational
< 479.3W (PoE: 370W)
Forwarding Performance
132 Mpps
Switching Capacity
256 Gbit/s
Memory (RAM)
256 MB
Flash
200 MB
Dimensions (W x D x H)
442 mm x 310 mm x 43.6 mm
Weight
6.7 kg
Product Details
Figure 2 shows the front panel of Huawei S5700-52X-PWR-LI-AC.
Note:
①
Forty-eight PoE+ 10/100/1000BASE-T ports
②
Four 10GE SFP+ ports
③
One mini USB port
④
One console port
Figure 3 shows the back panel of HuaweiS5700-52P-PWR-LI-AC.
Note:
①
Ground screw
②
RPS socket
③
Jack for AC terminal locking latch
④
AC socket
*The ground screw is used with a ground cable.
*RPS socket is used with an RPS cable, which is not hot swappable. A PoE switch can have an RPS power supply connected to this socket to provide inputs for system power supply and PoE power supply. The two inputs are independent of each other. The RPS power supply can also be used as a backup of the system power supply when it does not provide PoE power.
*The AC terminal locking latch is not delivered with the switch.
Choosing a selection results in a full page refresh.
Opens in a new window.
Cookie Consent Popup
We use cookies to enhance your browsing experience, serve personalized ads or content, and analyze our traffics. By clicking "Allow Cookies" you consent to our use of cookie.
