S5700-52C-SI-AC Specification
|
MAC address table |
-IEEE 802.1d compliance
-MAC address learning and aging
-Static, dynamic, and blackhole MAC address entries
-Packet filtering based on source MAC addresses
MAC address entries:
-S5700S-LI series: 8K,
-S5700-LI/S5700-SI series: 16K,
-S5700-EI series: 32K,
-S5720-EI series: 64K,
-S5700-HI series: 32K,
-S5710-HI: 456K,
-S5720-HI: 128K
|
VLAN |
-4K VLANs
-Guest VLAN and voice VLAN
-GVRP
-MUX VLAN
-VLAN assignment based on MAC addresses, protocols, IP subnets, policies, and ports
-1:1 and N:1 VLAN Mapping
-Super VLAN(supported by the S5700-SI/S5700-EI/S5700-HI series)
|
Ring protection |
-RRPP ring topology and RRPP multi-instance
-Smart Link tree topology and Smart Link multi-instance, providing the millisecond-level protection switchover
-SEP
-ERPS(G.8032)(supported by the S5700-LI/S5700-SI/S5700-EI/S5700-HI series)
-STP, RSTP, and MSTP
-BPDU protection, root protection, and loop protection
-BPDU Tunnel
|
Reliability |
-Ethernet OAM (IEEE 802.3ah and 802.1ag)
-ITU-Y.1731
-DLDP
-LACP
-E-Trunk(supported by the S5700-SI/S5700-EI/S5700-HI series)
-BFD for OSPF, BFD for IS-IS, BFD for VRRP, and BFD for PIM (supported by the S5700-EI/S5700-HI series)
|
MPLS features |
-MPLS L3VPN
-MPLS L2VPN(VPWS/VPLS)
-MPLS-TE
-MPLS QoS
Notes: supported by S5710-EI, S5700-HI and S5710-HI
|
IP routing |
-Static routing
-RIPv1, RIPv2 and RIPng,ECMP(supported by the S5700-SI/S5700-EI/S5700-HI series)
-OSPF, OSPFv3, IS-IS, IS-ISv6, BGP and BGP4+ (supported by the S5700-EI/S5700-HI series)
|
IPv6 features |
-Neighbor Discovery (ND)
-Path MTU (PMTU)
-IPv6 ping, IPv6 tracert, and IPv6 Telnet
-ACLs based on the source IPv6 address, destination IPv6 address, Layer 4 ports, or protocol type
-MLD v1/v2 snooping
-6to4 tunnel, ISATAP tunnel, and manually configured tunnel(supported by the S5700-SI/S5700-EI/S5700-HI series)
|
Multicast |
-IGMP v1/v2/v3 snooping and IGMP fast leave
-Multicast forwarding in a VLAN and multicast replication between VLANs
-Multicast load balancing among member ports of a trunk
-Controllable multicast
-Port-based multicast traffic statistics
-IGMP v1/v2/v3, PIM-SM, PIM-DM, PIM-SSM, MSDP (supported by the S5700-EI/S5700-HI series)
|
QoS/ACL |
-Rate limiting on packets sent and received by an interface
-Packet redirection
-Port-based traffic policing and two-rate three-color CAR
-Eight queues on each port
-WRR, DRR, SP, WRR+SP, and DRR+SP queue scheduling algorithms
-WRED (supported by the S5710-EI and S5700-HI)
-Re-marking of the 802.1p priority and DSCP priority
-Packet filtering at Layers 2 through 4, filtering out invalid frames based on the source MAC address, destination MAC address, source IP address, destination IP address, TCP/UDP port number, protocol type, and VLAN ID
-Rate limiting in each queue and traffic shaping on ports
|
Security |
-User privilege management and password protection
-DoS attack defense, ARP attack defense, and ICMP attack defense
-Binding of the IP address, MAC address, interface, and VLAN
-Port isolation, port security, and sticky MAC
-MFF
-Blackhole MAC address entries
-Limit on the number of learned MAC addresses
-802.1x authentication and limit on the number of users on an interface
-AAA authentication, RADIUS authentication, HWTACACS authentication, and NAC
-SSH v2.0
-Hypertext Transfer Protocol Secure (HTTPS)
-CPU defense
-Blacklist and whitelist
|
Access Security |
DHCP Relay, DHCP Server, DHCP Snooping, DHCP Security |
Management and maintenance |
-Virtual cable test
-Port mirroring and RSPAN (remote port mirroring)
-Remote configuration and maintenance using Telnet
-SNMP v1/v2c/v3
-RMON
-Web NMS
-HGMP
-System logs and alarms of different levels
-802.3az EEE (supported by the S5700(S)-LI, S5710-EI, S5700-HI and S5710-HI)
-Dying gasp (supported by the S5700-HI, S5710-HI and S5700(S)-LI(except battery LAN switches)
-NetStream (supported by the S5710-EI, S5700-HI and S5710-HI)
-sFlow(supported by the S5700(S)-LI/S5700-EI/S5700-HI series)
|
Interoperability |
-Supports VBST (Compatible with PVST/PVST+/RPVST)
-Supports LNP (Similar to DTP)
-Supports VCMP (Similar to VTP)
|
Operating environment |
Operating temperature: 0℃–50℃
Relative humidity: 10%–90% (non-condensing)
|
Input voltage |
AC:
-Rated voltage range: 100 V to 240 V AC, 50/60 Hz
-Maximum voltage range: 90 V to 264 V AC, 47/63 Hz
DC:
-Rated voltage range: –48 V to –60 V, DC
-Maximum voltage range: –36 V to –72 V DC
Note: PoE-support switches do not use DC power supplies.
|
