41.33 years when a 2x10GE card is configured; 50.00 years when a 4xGE front card is configured; 26.52 years when a 4x10GE front card is configured
52 years when a 2x10GE card is configured; 55.4 years when a 4xGE front card is configured
46.05 years when a 2x10GE card is configured; 57.08 years when a 4xGE front card is configured; 25.58 years when a 4x10GE front card is configured
Memory
256 MB
256 MB
256 MB
Flash
32 MB
32 MB
32 MB
Power
consumption
< 60 W
Max: 472 W (PoE: 370 W)
< 88 W
LS-S5328C-EI-24S Specifications
Memory (RAM)
256 MB
Flash
32 MB
Mean time between failures (MTBF)
41.33 years when a 2x10GE card is configured;
50.00 years when a 4xGE front card is configured; 26.52 years
when a 4x10GE front card is configured
Mean time to repair (MTTR)
2 hours
Availability
> 0.99999
Service port protection
±2 kV in common mode
Power supply protection
Non-PoE switch:
AC: ±6 kV in differential mode; ±6 kV in common mode
DC: ±1 kV in differential mode; ±2 kV in common mode
Dimensions (W x D x H)
442.0 mm x 420.0 mm x 43.6 mm
Weight
Fully loaded:≤ 8.5 kg
Empty loaded:≤ 5 kg
Stack ports
Two stack ports available on each stack card
Maximum stack bandwidth (bidirectional)
48 Gbit/s
RPS
Not supported
PoE
Yes
Rated voltage range
-48 V DC to -60 V DC
100 V AC to 240 V AC, 50/60 Hz
Maximum voltage range
-36 V DC to -72 V DC
90 V AC to 264 V AC, 47 Hz to 63 Hz
Maximum system
power consumption
(100% throughput,
100% PoE loads,
full speed of fans)
63 W
Operating temperature
0°C to 50°C
Storage temperature
-40°C to +70°C
Noise under normal temperature (27°C, sound power)
less than 41 dBA
Relative humidity
5% RH to 95% RH, noncondensing
Operating altitude
Non-PoE switch:
AC: 0 m to 5000 m
DC: 0 m to 2000 m
EMC
CISPR22 Class A
CISPR24
EN55022 Class A
EN50024
ETSI EN 300 386 Class A
CFR 47 FCC Part 15 Class A
ICES 003 Class A
AS/NZS CISPR22 Class A
IEC61000-4-2
ITU-T K 20
ITU-T K 44
Environmental
standards
RoHS
REACH
WEEE
Security
IEC 60950-1
EN 60950-1/A11/A12
UL 60950-1
CSA C22.2 No 60950-1
AS/NZS 60950.1
Laser safety
IEC60825-1
IEC60825-2
EN60825-1
EN60825-2
Huawei LS-S5328C-EI-24S is one of the Quidway S5300 series gigabit switches. The Quidway S5300 series gigabit switches (hereinafter referred to as the S5300s) are new generation Ethernet gigabit switches developed by Huawei to meet the requirements for high-bandwidth access and Ethernet multiservice convergence, providing powerful Ethernet functions for carriers and enterprise customers. Based on the new generation high-performance hardware and Huawei Versatile Routing Platform (VRP) software, the S5300 features large capacity and gigabit interfaces of high density, provides 10G uplinks, meeting customers' requirements for the 1G and 10G uplink devices of high density. The S5300 can meet the requirements of multiple scenarios such as service convergence on campus networks and intranets, the access to the IDC at a rate of 1000 Mbit/s, and the access to computers at a rate of 1000 Mbit/s on intranets. Huawei S5300 Series Switch S5328C-EI-24S Mainframe 24 100/1000 SFP, 4 Combo GE 10/100/1000 RJ-45),Chassis,Dual Slots of power,Without Flexible Card and Power Module, Basic layer 3 Features.
Quick Specs
Figure 1 shows the appearance of LS-S5328C-EI-24S.
Table 1 shows the Quick Specs.
Product Code
LS-S5328C-EI-24S
Fixed Port
24*10/100 /1000 Base-TX
Extended
slot
two extended slots，which can be installed with uplink subcard and stacking card respectively
Port
switching
capacity
(bit/s)
128 Gbit/s
Board
switching
capacity
256 Gbit/s
Forwarding Performance
96 Mpps
RPS
Not supported
PoE
No
Mean time between
failures (MTBF)
41.33 years when a 2x10GE card is configured; 50.00 years when a 4xGE front card is configured; 26.52 years when a 4x10GE front card is configured
Memory
256 MB
Flash
32 MB
Input voltage
AC: Rated voltage: 100 V to 240 V AC, 50/60 Hz Maximum voltage: 90 to 264 V AC, 50/60 Hz
DC: Rated voltage range: –48 V to –60 V, DC Maximum voltage: –36 to –72 V DC Note: POE hosts do not support DC power modules.
Power
consumption
< 60 W
Dimensions (W x D x H)
442.0 mm x 420.0 mm x 43.6 mm
Weight
Fully loaded ≤ 8.5 kg
Empty loaded ≤ 5 kg
Product Details
Figure 2 shows the front panel of LS-S5328C-EI-24S.
Note:
①
Twenty 100/1000BASE-X Ethernet optical ports
②
Four combo ports (10/100/1000BASE-T + 100/1000BASE-X)
③
One console port
④
One ETH management port
⑤
Front card slot
Figure 3 shows the back panel of LS-S5328C-EI-24S.
Note:
①
ESD jack
②
Rear card slot
③
Fan module slot
④
Power module slot 2
⑤
Power module slot 1
The Modules
Table 2 shows the recommended elements for the LS-S5328C-EI-24S.
Choosing a selection results in a full page refresh.
Opens in a new window.
Cookie Consent Popup
We use cookies to enhance your browsing experience, serve personalized ads or content, and analyze our traffics. By clicking "Allow Cookies" you consent to our use of cookie.
×
Please wait...
Make An Offer
"S5328C-EI-24S Mainframe(24 100\/1000Base-X,4 Combo GE(10\/100\/1000 BASE-T),Chassis,Dual Slots of power,Without Flexible Card and Power Module) - LS-S5328C-EI-24S"
£751.00
"S5328C-EI-24S Mainframe(24 100\/1000Base-X,4 Combo GE(10\/100\/1000 BASE-T),Chassis,Dual Slots of power,Without Flexible Card and Power Module) - LS-S5328C-EI-24S"
