Eight 10/100Base-TX ports and one gigabit(GE) combo port
Forwarding performance
2.68 Mpps
MAC address table
8 K MAC address entries Manual creation and deletion of MAC address entries Aging time of MAC address entries Disabling MAC address learning on an interface or aggregation group Limit on the number of MAC addresses learned on an interface Blackhole MAC address entries
VLAN features
4 K VLANs, complying with IEEE 802.1Q Port-based VLAN assignment
QoS
Port-based rate limiting and flow-based rate limiting Four or eight queues of different priorities on each port Mapping between 802.1p priorities and queues SP, WRR, and SP+WRR algorithms
IPv6 features
IPv6 host Static IPv6 routes
Multicast
IGMP v1/v2/v3 snooping Multicast load balancing among member ports of a trunk Port-based rate limiting and trafic statistics for multicast packets
Port mirroring
1:1 and N:1 port mirroring
Security
Port isolation Suppression of multicast, broadcast, and unknown unicast packets CPU defense
AC: Rated voltage range: 100 V to 240 V AC, 50/60 Hz Maximum voltage range: 90 V to 264 V AC, 50/60 Hz
Dimensions: width x depth x height
250 mm x 180 mm x 43.6 mm
Weight
1.4kg
Power consumption
< 12.8 W
Huawei S2700-9TP-SI-AC is a switch that supports 8 Ethernet 10/100 ports, one dual-purpose 10/100/1000 or SFP, AC 110/220V. It’s one of the S2700 Series Enterprise Switches that deliver Standard (SI) and Enhanced (EI) models with Huawei’s exclusive Easy Operation Toolkit for easy installation, configuration, monitoring, and trouble shooting. This switch is a Standard model.
Quick Specs
Figure 1 shows the appearance of Huawei S2700-9TP-SI-AC switch.
Table 1 shows the Quick Specs.
Product Code
S2700-9TP-SI-AC
Downlink Ports
8 x Ethernet 10/100 ports
Uplink Ports
1 x dual-purpose 10/100/1000 or SFP
MAC Address
8K MAC address entries
Forwarding Performance
2.7 Mpps
Switching Capacity
32 Gbit/s
Power
100 V AC to 240 V AC, 50/60 Hz
Heat Dissipation
Fan-free natural heat dissipation
Dimensions (W x D x H)
25 cm x 18 cm x 4.36 cm
Weight
2.1 Kg
Product Details
Figure 2 shows the front panel of Huawei S2700-9TP-SI-AC switch.
Note:
①
AC socket
④
1 x combo port (10/100/1000BASE-T + 100/1000BASE-X)
②
Ground Screw
⑤
1 x console port
③
8 x 10/100BASE-TX ports
· Ground Screw is used with a ground cable.
· One Combo Port supports 10/100/1000BASE-T or 100/1000BASE-X port. FE/GE/GE-CWDM optical transceivers are applicable to the combo ports.
Figure 3 shows the back looking of Huawei S2700-26TP-SI-AC switch.
The Transceiver
Table 2 shows the recommended optical transceivers.
Choosing a selection results in a full page refresh.
Opens in a new window.
Cookie Consent Popup
We use cookies to enhance your browsing experience, serve personalized ads or content, and analyze our traffics. By clicking "Allow Cookies" you consent to our use of cookie.
×
Please wait...
Make An Offer
"S2700-9TP-SI-AC Mainframe(8 Ethernet 10\/100 ports, 1 dual-purpose 10\/100\/1000 or SFP, AC 110\/220V) - S2700-9TP-SI-AC"
£196.00
"S2700-9TP-SI-AC Mainframe(8 Ethernet 10\/100 ports, 1 dual-purpose 10\/100\/1000 or SFP, AC 110\/220V) - S2700-9TP-SI-AC"
