VLAN support, IGMP snooping, IPv6 support, Access Control List (ACL) support, Quality of Service (QoS), Multicast Suppression
Compliant Standards
IEEE 802.1Q, IEEE 802.1p
Power
AC 120/230 V ( 50/60 Hz )
Dimensions (WxDxH)
44.2 cm x 22 cm x 4.4 cm
Weight
2.4 kg
Extended Specification
General
Authentication Method
Secure Shell (SSH), RADIUS, TACACS+
Capacity
Virtual interfaces (VLANs) : 4000
Compliant Standards
IEEE 802.1Q, IEEE 802.1p
Device Type
Switch - 16 ports - Managed - stackable
Enclosure Type
Desktop
Features
VLAN support, IGMP snooping, IPv6 support, Access Control List (ACL) support, Quality of Service (QoS), Multicast Suppression
Interfaces
Gigabit Ethernet
MAC Address Table Size
8K entries
Performance
Forwarding performance : 5.4 Mpps
Ports
16 x 10/100 + 2 x combo Gigabit SFP
Remote Management Protocol
SNMP 1, SNMP 2, RMON, Telnet, SNMP 3, SSH-2, CLI
Routing Protocol
IGMPv2, IGMP, IGMPv3, static IPv6 routing
Subtype
Gigabit Ethernet
Dimensions (D × H × W)
22 cm × 4.4 cm × 44.2 cm
Weight
2.4 Kg
Environmental Parameters
Humidity Range Operating
10 - 90% (non-condensing)
Humidity Range Storage
10 - 90% (non-condensing)
Max Operating Temperature
50 °C
Max Storage Temperature
55 °C
Min Operating Temperature
0 °C
Min Storage Temperature
-5 °C
Expansion / Connectivity
Interfaces
2 x 1000Base-T - RJ-45 ¦ 16 x 100Base-TX - RJ-45 ¦ 1 x console - RJ-45 - management ¦ 2 x SFP (mini-GBIC)
Power
Power Consumption Operational
14.5 Watt
Power Device
Internal power supply
Voltage Required
AC 120/230 V ( 50/60 Hz )
Huawei S2700-18TP-SI-AC is the entry-level access layer, layer 2 enterprise switch. It supports 16 Ethernet 10/100 ports, 2 dual-purpose 10/100/1000 or SFP, AC 110/220V. It’s one of the S2700 Series Enterprise Switches that deliver Standard (SI) and Enhanced (EI) models with Huawei’s exclusive Easy Operation Toolkit for easy installation, configuration, monitoring, and trouble shooting. This switch is a Standard model.
Quick Specs
Figure 1 shows the appearance of Huawei S2700-18TP-SI-AC switch.
Table 1 shows the Quick Specs.
Product Code
S2700-18TP-SI-AC
Downlink Ports
16 x Ethernet 10/100 ports
Uplink Ports
2 x dual-purpose 10/100/1000 or SFP
MAC Address
8K MAC address entries
Forwarding Performance
5.4 Mpps
Switching Capacity
32 Gbit/s
Memory (RAM)
64 MB
Flash
16 MB
Power
100 V AC to 240 V AC, 50/60 Hz
Heat Dissipation
Fan-free natural heat dissipation
Dimensions (W x D x H)
44.2 cm x 22 cm x 4.4 cm
Product Details
Figure 2 shows the front panel of Huawei S2700-18TP-SI-AC switch.
Note:
①
Ground Screw
④
2 x combo port (10/100/1000BASE-T + 100/1000BASE-X)
②
AC socket
⑤
1 x console port
③
16 x 10/100BASE-TX ports
·Ground Screw is used with a ground cable.
·Two Combo Ports support 10/100/1000BASE-T or 100/1000BASE-X ports. FE/GE/GE-CWDM optical transceivers are applicable to the combo ports.
Figure 3 shows the back looking of Huawei S2700-18TP-SI-AC switch.
The Transceiver
Table 2 shows the recommended optical transceivers.
Choosing a selection results in a full page refresh.
Opens in a new window.
Cookie Consent Popup
We use cookies to enhance your browsing experience, serve personalized ads or content, and analyze our traffics. By clicking "Allow Cookies" you consent to our use of cookie.
×
Please wait...
Make An Offer
"S2700-18TP-SI-AC Mainframe(16 Ethernet 10\/100 ports, 2 dual-purpose 10\/100\/1000 or SFP, AC 110\/220V) - S2700-18TP-SI-AC"
£161.00
"S2700-18TP-SI-AC Mainframe(16 Ethernet 10\/100 ports, 2 dual-purpose 10\/100\/1000 or SFP, AC 110\/220V) - S2700-18TP-SI-AC"
