4K VLANs, complying with IEEE 802.1Q Port-based VLAN assignment
MAC address-based assignment Port-based QinQ
QoS
Port-based rate limiting and flow-based rate limiting 4 or 8 queues of different priorities on each port Mapping between 802.1p priorities and queues SP, WRR, and SP+WRR algorithms
STP (IEEE 802.1d), RSTP (IEEE 802.1w), MSTP (IEEE 802.1s), and RRPP topology and RRPP multi-instance
Traffic sampling
N/A
Security & access features
802.1x authentication and limit on the number of users on an interface Storm suppression IP Source Guard
Multiple authentication methods including AAA authentication, RADIUS authentication, and TACACS+ authentication 802.1x authentication, MAC address authentication, MAC bypass authentication DHCP snooping Port isolation and sticky MAC Packet filtering based on MAC addresses Suppression of multicast, broadcast, and unknown unicast packets Limit on the number of learned MAC addresses CPU defense
Surge protection
Surge protection capability of service ports: 6 kV (The surge protection capability of service ports on PoE switches is 1 kV.)
Long-term operating temperature: –5°C to + 50°C Relative humidity: 10% to 90% (non-condensing)
Power
AC:
Rated voltage range: 100 V to 240 V AC, 50/60 Hz
Maximum voltage: 90 to 264 V AC, 50/60 Hz
Dimensions (W x D x H)
442 × 220 × 43.6 mm
Weight
S2700-18TP-EI<2.4 kg
Power consumption
S2700-18TP-EI<14.5 W
Huawei S2700-18TP-EI-AC is the entry-level access layer, layer 2 enterprise switch. It supports 16 Ethernet 10/100 ports, 2 dual-purpose 10/100/1000 or SFP, AC 110/220V. It’s one of the S2700 Series Enterprise Switches that deliver Standard (SI) and Enhanced (EI) models with Huawei’s exclusive Easy Operation Toolkit for easy installation, configuration, monitoring, and trouble shooting. This switch is a Enhanced model.
Quick Specs
Figure 1 shows the appearance of Huawei S2700-18TP-EI-AC switch.
Table 1 shows the Quick Specs.
Product Code
S2700-18TP-EI-AC
Downlink Ports
16 x Ethernet 10/100 ports
Uplink Ports
2 x dual-purpose 10/100/1000 or SFP
MAC Address
8K MAC address entries
Forwarding Performance
5.4 Mpps
Switching Capacity
32 Gbit/s
Memory (RAM)
64 MB
Flash
16 MB
Power
100 V AC to 240 V AC, 50/60 Hz
Heat Dissipation
Fan-free natural heat dissipation
Dimensions (W x D x H)
44.2 cm x 22 cm x 4.4 cm
Product Details
Figure 2 shows the front panel of Huawei S2700-18TP-EI-AC switch.
Note:
①
Ground Screw
④
2 x combo port (10/100/1000BASE-T + 100/1000BASE-X)
②
AC socket
⑤
1 x console port
③
16 x 10/100BASE-TX ports
·Ground Screw is used with a ground cable.
·Two Combo Ports support 10/100/1000BASE-T or 100/1000BASE-X ports. FE/GE/GE-CWDM optical transceivers are applicable to the combo ports.
Figure 3 shows the back looking of Huawei S2700-18TP-EI-AC switch.
The Transceiver
Table 2 shows the recommended optical transceivers.
Choosing a selection results in a full page refresh.
Opens in a new window.
Cookie Consent Popup
We use cookies to enhance your browsing experience, serve personalized ads or content, and analyze our traffics. By clicking "Allow Cookies" you consent to our use of cookie.
×
Please wait...
Make An Offer
"S2700-18TP-EI-AC Mainframe(16 Ethernet 10\/100 ports, 2 dual-purpose 10\/100\/1000 or SFP, AC 110\/220V) - S2700-18TP-EI-AC"
£242.00
"S2700-18TP-EI-AC Mainframe(16 Ethernet 10\/100 ports, 2 dual-purpose 10\/100\/1000 or SFP, AC 110\/220V) - S2700-18TP-EI-AC"
