IPv4 and IPv6 static routing RIP, RIPng, OSPF (S1720-E series)
Link Aggregation
12 Link Aggregation Groups (LAGs) with a maximum of eight ports in each LAG 64 Link Aggregation Groups (S1720 series) 120 Link Aggregation Groups (S1720-E series) Static LACP
Port Mirroring
Port-based bi-directional flow mirroring
Broadcast Storm Suppression
Broadcast storm suppression based on the interface rate Alarm sending when the traffic rate reaches the upper limit
Device Management
SNMP Web system network management (HTTPS) DHCP client User password protection One-key restoration CLI configuration (S1720/S1720-E series) Console port (S1720/S1720-E series)
Device Maintenance
Remote Network Monitoring (RMON) System log Ping and traceroute Virtual Cable Test (VCT) Link Layer Discovery Protocol (LLDP)
The Huawei S1700-52FR-2T2P-AC is full web-managed switch with 48 Ethernet 10/100 ports, 2 Ethernet 10/100/1,000 ports and 2 Gig SFP. It is green, energy-saving and belongs to the Ethernet access switch. SNMP-managed switch supports MSTP examples up to eight, making the networks smooth. With rich safety features, it can prevent attacks from hackers and virus in order to build secure, reliable, high-performance and multi-service networks for small- and medium-size enterprises.
Quick Specs
Figure 1 shows the appearance of Huawei S1700-52FR-2T2P-AC switch.
Product Code
S1700-52FR-2T2P-AC
Type
Web/SNMP-based Switch
Downlink Ports
48 x 10/100 ports
Uplink Ports
2 Ethernet 10/100/1000 ports and 2 Gig SFP
MAC Address Table Size
8K MAC
Voltage Required
100V to 240V AC, 50 Hz/60 Hz
Forwarding Performance
13.2 Mpps
Switching Capacity
17.6 Gbit/s
Power Consumption Operational
<35 W
Dimensions (W x D x H)
442 mm x 220 mm x 43.6 mm
EEE
NA
Product Details
Figure 2 shows the front panel of Huawei S1700-52FR-2T2P-AC switch.
Note：
①
Ethernet electrical port indicators
⑤
1000BASE-X port
②
10/100BASE-TX port
⑥
Reset button
③
GE1-GE4 port indicator
⑦
Power/System status indicator
④
10/100/1000BASE-T port
*Reset button: This button is used to reset the switch. Resetting the switch will cause service interruption. Exercise caution when you press the Reset button. To restore the factory settings, hold down the button for at least 6 seconds. To reset the system, press the button.
*An S1700-52FR-2T2P-AC has a built-in AC power supply, which provides power for the entire switch.
Table 2 shows the LED Indicators description.
Indicator
Status
Description
Power indicator
Steady green
The switch is powered on
Off
The switch is powered off.
System status
indicator
Steady green
The switch is starting or working abnormally.
Blinking green
The switch is working properly.
Off
The switch is not started.
10/100BASE-TX
indicator
Steady green
The port is connected at the rate of 10/100 Mbit/s
Blinking green
The port is transmitting data
Off
The port is not connected.
GE1-GE2 electrical
port indicator
Steady green
The port is connected at the rate of 1000 Mbit/s.
Blinking green
The port is connected at the rate of 1000 Mbit/s and transmitting data.
Steady yellow
The port is connected at the rate of 10/100 Mbit/s.
Blinking yellow
The port is connected at the rate of 10/100 Mbit/s and transmitting data.
Off
The port is not connected.
GE3-GE4 optical port indicator
Steady green
The port is connected at the rate of 1000 Mbit/s.
Blinking green
The port is connected at the rate of 1000 Mbit/s and transmitting data.
Off
The port is not connected.
Figure 3 shows the back panel of Huawei S1700-52FR-2T2P-AC.
Choosing a selection results in a full page refresh.
Opens in a new window.
Cookie Consent Popup
We use cookies to enhance your browsing experience, serve personalized ads or content, and analyze our traffics. By clicking "Allow Cookies" you consent to our use of cookie.
×
Please wait...
Make An Offer
"S1700-52FR-2T2P-AC(48 Ethernet 10\/100 Fast Ethernet ports,2 Gigabit Ethernet ports and 2 Gig SFP,AC 110\/220V) - S1700-52FR-2T2P-AC"
£241.00
"S1700-52FR-2T2P-AC(48 Ethernet 10\/100 Fast Ethernet ports,2 Gigabit Ethernet ports and 2 Gig SFP,AC 110\/220V) - S1700-52FR-2T2P-AC"
