Mellanox active fiber cable, IB EDR, up to 100Gb/s, QSFP, LSZH, 20m
Mellanox? MFA1A00-E020 are QSFP28 VCSEL-based (Vertical Cavity Surface-Emitting Laser) active optical cables designed for use in InfiniBand 100Gb/s EDR systems. 100G EDR AOCs are the most popular interconnect used in very high-speed InfiniBand High Performance Computing (HPC) environments as they offer predictable latency, very low power (2.2W) and enable increased air flow, tighter bend radii and significantly longer reach compared to DAC cables. Since the AOC is hot pluggable, it is easy to install and replace.
MFA1A00-E020 has a standard SFF-8665 compliant QSFP28 port on the electrical side towards the host system. It contains four multi-mode fibers (MMF) optic transceivers per end, each operating at data rates of up to 26Gb/s.
MFA1A00-E020 offers selectable retiming per lane for both its optical transmitters and receivers for the 25-26Gbp/s rates, but the AOC also supports lower bit rates without retiming. The transmitters have programmable input equalizers and input squelch function, while the receivers have programmable output amplitude and pre-emphasis.
AOCs enable higher port bandwidth, density and configurability at a low cost, and reduced power requirement in the data centers, used extensively in cloud and supercomputers. Additionally, AOCs are widely employed for connecting NVIDIA GPU-based systems to InfiniBand networks and InfiniBand storage fabrics.
AOC cables offer the low-cost, high-value proposition and increased reliability over connectorized transceivers. They are lighter, more flexible, allow greater airflow, and support longer distances when compared with DAC cables.
Quick Spec
Table 1 shows the quick spec.
| Model |
MFA1A00-E020 |
| Parameter |
Minimum |
Maximum |
Units |
| Supply voltage |
-0.3 |
3.6 |
V |
| Data input voltage |
-0.3 |
3.465 |
V |
| Control input voltage |
-0.3 |
4.0 |
V |
| Damage threshold |
3.4 |
--- |
dBm |
| Supply voltage (Vcc) |
3.315 |
3.465 |
V |
Features
100G Connectivity for Data Center
Featured with <2.2W low-power, high-density and high-speed, the QSFP28 transceiver offers a popular way to help you quickly ramp up to 100G transmission.
Tested in Host Devices for Proven Interoperability
Every unit is quality tested for compatibility in the targeted switch environment, which guarantees flawless operations.
Flexible Deployment
This cable offers versatile and adaptable deployment options, supporting a capacity of 100G. It can be smoothly connected to a wide range of devices within your network.
Product Applications
- ● Data Center Interconnects:Ideal for connecting servers, switches, and storage within a data center.
- ● High-Performance Computing (HPC):Provides the necessary bandwidth and low latency for HPC environments.
- ● Enterprise Networks:Suitable for upgrading enterprise networks to support higher bandwidth requirements.
- ● Cloud Service Providers:Enables cloud service providers to offer high-speed, reliable connectivity to their clients.
Supported Options
- ● Network Ports:QSFP28 interfaces on both ends.
- ● Cable Types:Passive copper cable, 20 meters in length.
- ● Operating Systems:Compatible with various networking equipment and operating systems.
Compare to Similar Items
Get More Information
Do you have any question about the MFA1A00-E020?
Contact us now via Live Chat or [email protected].
Mellanox active fiber cable, IB EDR, up to 100Gb/s, QSFP, LSZH, 20m
Mellanox? MFA1A00-E020 are QSFP28 VCSEL-based (Vertical Cavity Surface-Emitting Laser) active optical cables designed for use in InfiniBand 100Gb/s EDR systems. 100G EDR AOCs are the most popular interconnect used in very high-speed InfiniBand High Performance Computing (HPC) environments as they offer predictable latency, very low power (2.2W) and enable increased air flow, tighter bend radii and significantly longer reach compared to DAC cables. Since the AOC is hot pluggable, it is easy to install and replace.
MFA1A00-E020 has a standard SFF-8665 compliant QSFP28 port on the electrical side towards the host system. It contains four multi-mode fibers (MMF) optic transceivers per end, each operating at data rates of up to 26Gb/s.
MFA1A00-E020 offers selectable retiming per lane for both its optical transmitters and receivers for the 25-26Gbp/s rates, but the AOC also supports lower bit rates without retiming. The transmitters have programmable input equalizers and input squelch function, while the receivers have programmable output amplitude and pre-emphasis.
AOCs enable higher port bandwidth, density and configurability at a low cost, and reduced power requirement in the data centers, used extensively in cloud and supercomputers. Additionally, AOCs are widely employed for connecting NVIDIA GPU-based systems to InfiniBand networks and InfiniBand storage fabrics.
AOC cables offer the low-cost, high-value proposition and increased reliability over connectorized transceivers. They are lighter, more flexible, allow greater airflow, and support longer distances when compared with DAC cables.
Quick Spec
Table 1 shows the quick spec.
| Model |
MFA1A00-E020 |
| Parameter |
Minimum |
Maximum |
Units |
| Supply voltage |
-0.3 |
3.6 |
V |
| Data input voltage |
-0.3 |
3.465 |
V |
| Control input voltage |
-0.3 |
4.0 |
V |
| Damage threshold |
3.4 |
--- |
dBm |
| Supply voltage (Vcc) |
3.315 |
3.465 |
V |
Features
100G Connectivity for Data Center
Featured with <2.2W low-power, high-density and high-speed, the QSFP28 transceiver offers a popular way to help you quickly ramp up to 100G transmission.
Tested in Host Devices for Proven Interoperability
Every unit is quality tested for compatibility in the targeted switch environment, which guarantees flawless operations.
Flexible Deployment
This cable offers versatile and adaptable deployment options, supporting a capacity of 100G. It can be smoothly connected to a wide range of devices within your network.
Product Applications
- ● Data Center Interconnects:Ideal for connecting servers, switches, and storage within a data center.
- ● High-Performance Computing (HPC):Provides the necessary bandwidth and low latency for HPC environments.
- ● Enterprise Networks:Suitable for upgrading enterprise networks to support higher bandwidth requirements.
- ● Cloud Service Providers:Enables cloud service providers to offer high-speed, reliable connectivity to their clients.
Supported Options
- ● Network Ports:QSFP28 interfaces on both ends.
- ● Cable Types:Passive copper cable, 20 meters in length.
- ● Operating Systems:Compatible with various networking equipment and operating systems.
Compare to Similar Items
Get More Information
Do you have any question about the MFA1A00-E020?
Contact us now via Live Chat or [email protected].
