48 x 1/10/25-Gbps and 6 x 40/100-Gbps QSFP28 ports
48 x 100M/1/10GBASE-T and 6 x 40/100-Gbps QSFP28 ports
48 x 1-GBASE-T ports, 4 x 1/10/25-Gbps SFP28 ports and 2 x 40/100 QSFP28 ports
CPU
6 cores
4 cores
4 cores
System memory
Up to 32 GB
24 GB
24 GB
SSD drive
128 GB
128 GB
128 GB
System buffer
40 MB
40 MB
40 MB
USB ports
1
1
1
RS-232 serial ports
1
1
1
N9K-C93180YC-FX Specification
Hardware performance and scalability
Ports
48 x 1/10/25-Gbps and 6 x 40/100-Gbps QSFP28 ports
Downlink supported speeds
1/10/25-Gbps Ethernet
16/32-Gbps Fibre Channel
CPU
6 cores
System memory
Up to 32 GB
SSD drive
128 GB
System buffer
40 MB
Management ports
1 RJ-45 port
L1 and L2 ports are unused
USB ports
1
RS-232 serial ports
1
Power supplies (up to 2)
500W AC, 930W DC, or 1200W HVAC/HVDC
Typical power (AC/DC)
260W
Maximum power (AC/DC)*
425W
Input voltage (AC)
100 to 240V
Input voltage (High-Voltage AC [HVAC])
200 to 277V
Input voltage (DC)
–48 to –60V
Input voltage (High-Voltage DC [HVDC])
–240 to –380V
Frequency (AC)
50 to 60 Hz
Fans
4
Airflow
Port-side intake and exhaust
Physical dimensions (H x W x D)
1.72 x 17.3 x 22.5 in. (4.4 x 43.9 x 57.1 cm)
Acoustics
57 dBA at 40% fan speed, 68.9 dBA at 70% fan speed, and 77.4 dBA at 100% fan speed
RoHS compliance
Yes
MTBF
238,470 hours
Environmental properties
Operating temperature
32 to 104°F (0 to 40°C)
Nonoperating (storage) temperature
–40 to 158°F (–40 to 70°C)
Humidity
5 to 95% (noncondensing)
Altitude
0 to 13,123 ft (0 to 4000m)
The Cisco Nexus 93180YC-FX Switch is a 1RU switch with latency of less than 1 microsecond that supports 3.6 Tbps of bandwidth and 1.2 bpps. The 48 downlink ports on the 93180YC-FX are capable of supporting 1-, 10-, or 25-Gbps Ethernet or as 16-, 32-Gbps Fibre Channel ports, creating a point of convergence for primary storage, compute servers, and back-end storage resources at the top of rack.
Quick Specs
Table 1 shows the Specs.
SKU
N9K-C93180YC-FX
Ports
48 x 1/10/25-Gbps and 6 x 40/100-Gbps QSFP28 ports
Downlink supported speeds
1/10/25-Gbps Ethernet
16/32-Gbps Fibre Channel
CPU
6 cores
System memory
Up to 32 GB
SSD drive
128 GB
System buffer
40 MB
Typical power (AC/DC)
260W
USB ports
1
RS-232 serial ports
1
Product Details
Cisco N9K-C93180YC-FX provides the following features and benefits:
①Architectural Flexibility
②Architectural Flexibility
③High Scalability, Flexibility, and Security
④Intelligent Buffer Management
⑤RDME over Converged Ethernet – RoCE Support
⑥LAN and SAN Convergence
⑦Hardware and Software High Availability
⑧Purpose-Built Cisco NX-OS Software Operating System with Comprehensive, Proven Innovations
⑨Cisco Tetration Analytics Platform Support
⑩Cisco Network Assurance Engine (NAE)
Figure 1 shows the front panel of Cisco N9K-C93180YC-FX.
Note:
①
Beacon [BCN], Status [STS], and Environment [ENV] LEDs
②
48 10/1-Gigabit RJ45 ports
③
6 40/100-Gigabit QSFP28 ports
Figure 2 shows the rear panel of Cisco N9K-C93180YC-FX.
Note:
①
Two power supplies (one used for operations and one used for redundancy) (AC power supplies shown) with power supply slot 1 on the left and slot 2 on the right.
②
Four fan modules with fan slot 1 on the left and fan slot 4 on the right
Choosing a selection results in a full page refresh.
Opens in a new window.
Cookie Consent Popup
We use cookies to enhance your browsing experience, serve personalized ads or content, and analyze our traffics. By clicking "Allow Cookies" you consent to our use of cookie.
×
Please wait...
Make An Offer
"Nexus 9300 with 48p 1\/10G\/25G SFP and 6p 40G\/100G QSFP28, MACsec, and Unified Ports capable - N9K-C93180YC-FX"
£35,175.00
"Nexus 9300 with 48p 1\/10G\/25G SFP and 6p 40G\/100G QSFP28, MACsec, and Unified Ports capable - N9K-C93180YC-FX"
