Mellanox active fiber cable, IB EDR, up to 100Gb/s, QSFP, LSZH, 5m
Mellanox? MFA1A00-Exxx are QSFP28 VCSEL-based (Vertical Cavity Surface-Emitting Laser) active optical cables designed for use in InfiniBand 100Gb/s EDR systems. 100G EDR AOCs are the most popular interconnect used in very high-speed InfiniBand High Performance Computing (HPC) environments as they offer predictable latency, very low power (2.2W) and enable increased air flow, tighter bend radii and significantly longer reach compared to DAC cables. Since the AOC is hot pluggable, it is easy to install and replace.
MFA1A00-Exxx has a standard SFF-8665 compliant QSFP28 port on the electrical side towards the host system. It contains four multi-mode fibers (MMF) optic transceivers per end, each operating at data rates of up to 26Gb/s.
MFA1A00-Exxx offers selectable retiming per lane for both its optical transmitters and receivers for the 25-26Gbp/s rates, but the AOC also supports lower bit rates without retiming. The transmitters have programmable input equalizers and input squelch function, while the receivers have programmable output amplitude and pre-emphasis.
Quick Spec
Table 1 shows the quick spec.
| Model |
MFA1A00-E005 |
| Parameter |
Minimum |
Maximum |
Units |
| Supply voltage |
-0.3 |
3.6 |
V |
| Data input voltage |
-0.3 |
3.465 |
V |
| Control input voltage |
-0.3 |
4.0 |
V |
| Damage threshold |
3.4 |
--- |
dBm |
| Supply voltage (Vcc) |
3.315 |
3.465 |
V |
Supported Options
- ● Network Ports:QSFP28 interfaces on both ends.
- ● Cable Types:Passive copper cable, 5 meters in length.
- ● Operating Systems:Compatible with various networking equipment and operating systems.
Compare to Similar Items
Get More Information
Do you have any question about the MFA1A00-E005?
Contact us now via Live Chat or [email protected].
Mellanox active fiber cable, IB EDR, up to 100Gb/s, QSFP, LSZH, 5m
Mellanox? MFA1A00-Exxx are QSFP28 VCSEL-based (Vertical Cavity Surface-Emitting Laser) active optical cables designed for use in InfiniBand 100Gb/s EDR systems. 100G EDR AOCs are the most popular interconnect used in very high-speed InfiniBand High Performance Computing (HPC) environments as they offer predictable latency, very low power (2.2W) and enable increased air flow, tighter bend radii and significantly longer reach compared to DAC cables. Since the AOC is hot pluggable, it is easy to install and replace.
MFA1A00-Exxx has a standard SFF-8665 compliant QSFP28 port on the electrical side towards the host system. It contains four multi-mode fibers (MMF) optic transceivers per end, each operating at data rates of up to 26Gb/s.
MFA1A00-Exxx offers selectable retiming per lane for both its optical transmitters and receivers for the 25-26Gbp/s rates, but the AOC also supports lower bit rates without retiming. The transmitters have programmable input equalizers and input squelch function, while the receivers have programmable output amplitude and pre-emphasis.
Quick Spec
Table 1 shows the quick spec.
| Model |
MFA1A00-E005 |
| Parameter |
Minimum |
Maximum |
Units |
| Supply voltage |
-0.3 |
3.6 |
V |
| Data input voltage |
-0.3 |
3.465 |
V |
| Control input voltage |
-0.3 |
4.0 |
V |
| Damage threshold |
3.4 |
--- |
dBm |
| Supply voltage (Vcc) |
3.315 |
3.465 |
V |
Supported Options
- ● Network Ports:QSFP28 interfaces on both ends.
- ● Cable Types:Passive copper cable, 5 meters in length.
- ● Operating Systems:Compatible with various networking equipment and operating systems.
Compare to Similar Items
Get More Information
Do you have any question about the MFA1A00-E005?
Contact us now via Live Chat or [email protected].
