HPE FlexNetwork 5130 24G POE+ 2SFP+ 2XGT (370W) EI Switch
HPE FlexNetwork 5130 48G POE+ 2SFP+ 2XGT (370W) EI Switch
I/O ports and slots
· 24 x RJ-45 autosensing 10/100/1000 ports (IEEE 802.3 Type 10BASE-T, IEEE 802.3u Type 100BASE-TX, IEEE 802.3ab Type 1000BASE-T); Duplex: 10BASE-T/100BASE-TX: half or full; 1000BASE-T: full only
· 2 x SFP+ fixed 1000/10000 SFP+ ports
· 2 x RJ-45 1/10GBASE-T ports
· 48 x 10/100/1000 ports,
· 2 x 1GbE / 10GbE SFP+ ports,
· 2 x RJ 45 1GbE / 10GBASE T ports.
· 24 x RJ-45 autosensing 10/100/1000 ports
· 2 x SFP+ fixed 1000/10000 SFP+ ports
· 2 x RJ-45 1/10GBASE-T ports
· 48 x RJ-45 autosensing 10/100/1000 ports
· 2 x SFP+ fixed 1000/10000 SFP+ ports
· 2 x RJ-45 1/10GBASE-T ports
Additional ports and slots
1 x RJ-45 serial console port
1 x RJ-45 serial console port
1 x RJ-45 serial console port
1 x RJ-45 serial console port
JG941A Specification
Type
HPE FlexNetwork 5130 48G POE+ 2SFP+ 2XGT (370W) EI Switch
Differentiator
· Gigabit Ethernet switch with 48 10/100/1000BASE-T, 2 SFP+ and 2 10GBASE-T ports
· Intelligent Resilient Framework (IRF) technology, static and RIP Layer 3 routing, and PoE/PoE+, supported
Ports
· 48 x RJ-45 autosensing 10/100/1000 ports
· 2 x SFP+ fixed 1000/10000 SFP+ ports
· 2 x RJ-45 1/10GBASE-T ports
Memory and processor
· 1 GB SDRAM
· Packet buffer size: 3 MB
· 512 MB flash
Latency
1000 Mb Latency: < 5 µs
10 Gbps Latency: < 1.5 µs
Throughput
up to 130.9 Mpps
Routing/switching capacity
176 Gbps
PoE capability
370 W PoE+
Stacking capabilities
IRF
9 switches
Management features
IMC - Intelligent Management Center
Command-line interface
Web browser
SNMP manager
Input voltage
100 - 240 VAC, rated
-54 to -57 VDC, rated (depending on power supply chosen)
Operating temperature range
-5 to 45°C
Operating humidity range
10 to 90% (noncondensing)
Power consumption
70 W (maximum)
Heat dissipation
147 / 1603 BTU/hr (155.08 / 1691.17 kJ/hr)
Minimum dimensions (W x D x H)
17.32 x 16.54 x 1.72 in (43.99 x 42.01 x 4.37 cm)
Weight
15.43 lb (7 Kg)
HPE FlexNetwork 5130 EI Series switches are fully managed enterprise class Gigabit switches supporting Layer 3 static routing and RIP routing, IRF stacking up to nine units high, with four built in 10 Gigabit links. This JG941A has 48x 10/100/1000 PoE+ enabled ports, 2x 1GbE / 10GbE SFP+ ports, and 2x RJ 45 1GbE / 10GBASE T ports. Transceivers must be purchased separately.
Quick Spec
Figure 1 shows the appearance of HPE JG941A.
Table 1 shows the quick spec.
Product Code
JG941A
Type
HPE FlexNetwork 5130 48G POE+ 2SFP+ 2XGT (370W) EI Switch
I/O ports and slots
● 48 x RJ-45 autosensing 10/100/1000 ports
● 2 x SFP+ fixed 1000/10000 SFP+ ports
● 2 x RJ-45 1/10GBASE-T ports
Additional ports and slots
1 x RJ-45 serial console port
Memory and processor
● 1 GB SDRAM
● Packet buffer size: 3 MB
● 512 MB flash
Dimensions
17.32 x 16.54 x 1.72 in (43.99 x 42.01 x 4.37 cm)
Weight
15.43 lb (7 Kg)
Product Details
Figure 2 shows the front panel of HPE JG941A.
Note:
①
48 × 10/100/1000Base-T autosensing Ethernet
port
②
2 × SFP+ port
③
2 × 1/10GBase-T autosensing Ethernet port
④
Port mode LED, System status LED (SYS) and RPS status LED (RPS)
HPE FlexNetwork 5130 24G POE+ 2SFP+ 2XGT (370W) EI Switch
HPE FlexNetwork 5130 48G POE+ 2SFP+ 2XGT (370W) EI Switch
I/O ports and slots
· 24 x RJ-45 autosensing 10/100/1000 ports (IEEE 802.3 Type 10BASE-T, IEEE 802.3u Type 100BASE-TX, IEEE 802.3ab Type 1000BASE-T); Duplex: 10BASE-T/100BASE-TX: half or full; 1000BASE-T: full only
Choosing a selection results in a full page refresh.
Opens in a new window.
Cookie Consent Popup
We use cookies to enhance your browsing experience, serve personalized ads or content, and analyze our traffics. By clicking "Allow Cookies" you consent to our use of cookie.