24 x RJ-45 autosensing 10/100/1000 ports (IEEE 802.3 Type 10BASE-T, IEEE 802.3u Type 100BASE-TX,
IEEE 802.3ab Type 1000BASE-T); Duplex: 10BASE-T/100BASE-TX: half or full; 1000BASE-T: full only 2 x SFP+ fixed 1000/10000 SFP+ ports 2 x RJ-45 1/10GBASE-T ports
HPE FlexNetwork 5130-24G-PoE+-4SFP+ (370W) EI Switch
HPE FlexNetwork 5130-48G-PoE+-4SFP+ (370W) EI Switch
HPE FlexNetwork 5130-24G-2SFP+-2XGT EI Switch
HPE FlexNetwork 5130-48G-2SFP+-2XT EI Switch
I/O ports and slots
· 24 x RJ-45 autosensing 10/100/1000 ports
· 4 x SFP+ fixed 1000/10000 SFP+ ports
· 48 x RJ-45 autosensing 10/100/1000 ports
· 4 x SFP+ fixed 1000/10000 SFP+ ports
· 24 x RJ-45 autosensing 10/100/1000 ports
· 2 x SFP+ fixed 1000/10000 SFP+ ports
· 2 x RJ-45 1/10GBASE-T ports
· 48 x 10/100/1000 ports,
· 2 x 1GbE / 10GbE SFP+ ports
· 2 x RJ 45 1GbE / 10GBASE T ports
Additional ports and slots
1 x RJ-45 serial console port
1 x RJ-45 serial console port
1 x RJ-45 serial console port
1 x RJ-45 serial console port
JG938A Specifications
Type
HP 5130-24G-2SFP+-2XGT EI Switch
System specifications
I/O ports and slots
· 24 x RJ-45 autosensing 10/100/1000 ports (IEEE 802.3 Type 10BASE-T, IEEE 802.3u Type 100BASE-TX, IEEE 802.3ab Type 1000BASE-T); Duplex: 10BASE-T/100BASE-TX: half or full; 1000BASE-T: full only
· 2 x SFP+ fixed 1000/10000 SFP+ ports
· 2 x RJ-45 1/10GBASE-T ports
Additional ports and slots
1 x RJ-45 serial console port
Power supplies
N/A
Memory and processor
· 1 GB SDRAM
· 512 MB flash
· packet buffer size: 1.5 MB
Mounting and enclosure
Mounts in an EIA standard 19-inch telco rack or equipment cabinet (hardware included)
4.37 x 44 x 16 cm (1.72 x 17.32 x 6.3 in) (1U height)
Weight
3 kg (6.61 lb)
Environmental specifications
Acoustic
Low-speed fan: 19 dB
High-speed fan: 44.5 dB
ISO 7779
Operating temperature
0°C to 45°C (32°F to 113°F)
Operating relative humidity
10% to 90%, noncondensing
Nonoperating/Storage temperature
-40°C to 70°C (-40°F to 158°F)
Nonoperating/Storage relative humidity
5% to 95%, noncondensing
Electrical specifications
Frequency
50/60 Hz
Maximum heat dissipation
68/116 BTU/hr (71.74/122.38 kJ/hr) for AC power
AC voltage
100 - 240 V ac
Safety certifications
Safety
UL 60950-1; EN 60825-1 Safety of Laser Products-Part 1; EN 60825-2 Safety of Laser Products-Part 2; IEC 60950-1; CAN/CSA-C22.2 No. 60950-1; Anatel; ULAR; GOST; EN 60950-1/A11; FDA 21 CFR Subchapter J; NOM; ROHS Compliance
Emissions
EMC Directive 2004/108/EC; FCC (CFR 47, Part 15) Class A; EN 61000-4-11:2004; ANSI C63.4-2009; EN 61000-3-3:2008; VCCI V-4/2012.04; EN 6100-3-2:2006+A1:2009 + A2:2009; EN 61000-3-2:2006+A1:2009+A2:2009 ; EN 61000-4-3:2006; EN 61000-4-4:2012; EN 61000-4-5:2006; EN 61000-4-6:2009; AS/NZS CISPR 22:2009 Class A; CISPR 22:2008 Class A; EN 55022:2010 Class A; EN 61000-4-29: 2000; CISPR 24:2010; EN 300 386 V1.6.1; VCCI V-3/2013.04 Class A
Immunity
· Generic: EN 55024
· ESD: EN300 386
HPE FlexNetwork 5130 EI Series switches are fully managed enterprise class Gigabit switches supporting Layer 3 static routing and RIP routing, IRF stacking up to nine units high, with four built in 10 Gigabit links. This JG938A has 24 x 10/100/1000 ports, 2 x 1GbE / 10GbE SFP+ ports, and 2x RJ 45 1GbE / 10GBASE T ports. Transceivers must be purchased separately.
Quick Spec
Figure 1 shows the appearance of HPE JG938A.
Table 1 shows the quick spec.
Product Code
JG938A
Type
HP 5130-24G-2SFP+-2XGT EI Switch
I/O ports and slots
24 x RJ-45 autosensing 10/100/1000 ports (IEEE 802.3 Type 10BASE-T, IEEE 802.3u Type 100BASE-TX,
IEEE 802.3ab Type 1000BASE-T); Duplex: 10BASE-T/100BASE-TX: half or full; 1000BASE-T: full only 2 x SFP+ fixed 1000/10000 SFP+ ports 2 x RJ-45 1/10GBASE-T ports
Choosing a selection results in a full page refresh.
Opens in a new window.
Cookie Consent Popup
We use cookies to enhance your browsing experience, serve personalized ads or content, and analyze our traffics. By clicking "Allow Cookies" you consent to our use of cookie.