Cisco Firepower 2130 NGFW Appliance, 1RU,1 x Network Module Bays
Cisco Firepower 2120 NGFW Appliance, 1RU
Dimensions (H x W x D)
1.73 x 16.90 x 19.76 in. (4.4 x 42.9 x 50.2 cm)
1.73 x 16.90 x 19.76 in. (4.4 x 42.9 x 50.2 cm)
Form factor (rack units)
1RU
1RU
I/O module slots
1 NM slot
0
Integrated I/O
12 x 10M/100M/1GBASE-T Ethernet interfaces (RJ-45), 4 x 10 Gigabit (SFP+) Ethernet interfaces
12 x 10M/100M/1GBASE-T Ethernet interfaces (RJ-45), 4 x 1 Gigabit (SFP) Ethernet interfaces
Network modules
(FPR-NM-8X10G) 8 x 10 Gigabit Ethernet Enhanced Small Form-Factor Pluggable (SFP+) network module
None
Maximum number of interfaces
Up to 24 total Ethernet ports (12x1G RJ-45, 4x10G SFP+, and network module with 8x10G SFP+)
Up to 16 total Ethernet ports (12x1G RJ-45, 4x1G SFP)
Storage
1x 200 GB, 1x spare slot (for MSP)
1x 100 GB, 1x spare slot (for MSP)
FPR2130-NGFW-K9 Specification
Hardware Specifications
Dimensions (H x W x D)
1.73 x 16.90 x 19.76 in. (4.4 x 42.9 x 50.2 cm)
Form factor (rack units)
1RU
I/O module slots
1 NM slot
Integrated I/O
12 x 10M/100M/1GBASE-T Ethernet interfaces (RJ-45), 4 x 10 Gigabit (SFP+) Ethernet interfaces
Network modules
(FPR-NM-8X10G) 8 x 10 Gigabit Ethernet Enhanced Small Form-Factor Pluggable (SFP+) network module
Maximum number of interfaces
Up to 24 total Ethernet ports (12x1G RJ-45, 4x10G SFP+, and network module with 8x10G SFP+)
Integrated network management ports
1 x 10M/100M/1GBASE-T Ethernet port (RJ-45)
Serial port
1 x RJ-45 console
USB
1 x USB 2.0 Type-A (500mA)
Storage
1x 200 GB, 1x spare slot (for MSP)
Power supplies
Configuration
Single integrated 250W AC power supply.
AC input voltage
100 to 240V AC
AC maximum input current
< 6A at 100V
AC maximum output power
400W
AC frequency
50 to 60 Hz
AC efficiency
>89% at 50% load
DC input voltage
-48V to -60VDC
DC maximum input current
< 12.5A at -48V
DC maximum output power
350W
DC efficiency
>88% at 50% load
Redundancy
1+1 AC or DC with dual supplies
Fans
1 hot-swappable fan module (with 4 fans)
Noise
56 dBA @ 25C
77 dBA at highest system performance.
Rack mountable
Yes. Mount rails included (4-post EIA-310-D rack)
Weight
19.4 lb (8.8 kg) 1 x power supplies, 1 x NM, 1 x fan module, 2x SSDs
Temperature: operating
32 to 104°F (0 to 40°C) or NEBS operation (see below)
Temperature: nonoperating
-4 to 149°F (-20 to 65°C)
Humidity: operating
10 to 85% noncondensing
Humidity: nonoperating
5 to 95% noncondensing
Altitude: operating
10,000 ft (max) or NEBS operation (see below)
Altitude: nonoperating
40,000 ft (max)
NEBS operation
Operating altitude: 0 to 13,000 ft (3962 m)
Operating temperature:
Long term: 0 to 45°C, up to 6,000 ft (1829 m)
Long term: 0 to 35°C, 6,000 to 13,000 ft (1829 to 3964 m)
Short term: -5 to 55°C, up to 6,000 ft (1829 m)
The Cisco Firepower 2100 Series is a family of four threat-focused NGFW security platforms that deliver business resiliency through superior threat defense. It offers exceptional sustained performance when advanced threat functions are enabled. These platforms uniquely incorporate an innovative dual multicore CPU architecture that optimizes firewall, cryptographic, and threat inspection functions simultaneously. The series’ firewall throughput range addresses use cases from the Internet edge to the data center. Network Equipment Building Standards (NEBS)- compliance is supported by the Cisco Firepower 2100 Series platform. The FPR2130-NGFW-K9 stands for Cisco Firepower 2130 NGFW Appliance, 1RU, 1 x Network Module Bays.
Choosing a selection results in a full page refresh.
Opens in a new window.
Cookie Consent Popup
We use cookies to enhance your browsing experience, serve personalized ads or content, and analyze our traffics. By clicking "Allow Cookies" you consent to our use of cookie.
×
Please wait...
Make An Offer
"Cisco Firepower 2130 NGFW Appliance. 1U. 1 x NetMod Bay, Firepower 2130 series - FPR2130-NGFW-K9"
£39,175.98
"Cisco Firepower 2130 NGFW Appliance. 1U. 1 x NetMod Bay, Firepower 2130 series - FPR2130-NGFW-K9"
