3 x 10Base-T/100Base-TX/1000Base-T - RJ-45 Management : 1 x console - RJ-45 Management : 1 x console - mini-B Type B Serial : 1 x auxiliary - RJ-45 Hi-Speed B : 2 x 4 PIN B Type A 2 x SFP (mini-GBIC)
Expansion Slots Total (Free)
4 ( 4 ) x EHWIC 4 ( 4 ) x PVDM 2 ( 1 ) x CompactFlash Card 1 ( 1 ) x Expansion Slot 4 ( 4 ) x service module (SM)
Power Supply
Power Device
Power supply - internal
Voltage Required
AC 120/230 V ( 47/63 Hz )
Dimensions / Weight / Miscellaneo
Width
47.6 cm
Depth
43.8 cm
Height
13.3 cm
Weight
17.7 kg
Compliant Standards
CISPR 22 Class A, CISPR 24, EN55024, EN55022 Class A, EN50082-1, AS/NZS 60950-1, AS/NZ 3548 Class A, CAN/CSA-E60065-00, ICES-003 Class A, CS-03, FCC CFR47 Part 15, EN300-386, UL 60950-1, IEC 60950-1, EN 60950-1, CSA C22.2 No. 60065, BSMI CNS 13438
System Software
IOS Software Included
Cisco IOS Security
The Cisco 3945 router, modular Services Performance Engine (SPE) 150, which can be upgraded for even higher performance as next-generation WAN environments evolve. CISCO3945-SEC/K9 bundle Security function, supporting Security Cisco IOS Firewall, IPS, IPsec (3DES and AES), SSL VPN, and IP BaseEntry-Level Cisco IOS Softeare Functions
Quick Specs
Table 1 shows the Quick Specs of the CISCO3945-SEC/K9.
Product Code
CISCO3945-SEC/K9
Bundle
Security Function
Services Performance Engine module
w/SPE 150
Rack Units
3U
Interfaces
3 integrated 10/100/1000 Ethernet ports with 2 ports capable of RJ-45 or SFP connectivity
Expansion Slot(s)
4 service module slots
1 Internal Services Module slot
4 onboard digital signal processor (DSP) slots
4 Enhanced High-Speed WAN Interface Card (EHWIC) slots
RAM
1 GB (installed) / 2 GB (max)
Flash Memory
256 MB (installed) / 8 GB (max)
Dimensions
47.6 cm x 43.8 cm x 13.3 cm
Product Details
Figure 1 shows the front panel of the CISCO3945-SEC/K9.
Note:
① On/Off switch ② Power connector ③ LEDs area
Table 2 shows the LEDs area description.
LED
Description
SYS stat LED
Solid green
Solid green indicates normal operation.
Blinking green
System is booting or is in ROM monitor mode.
Amber
System error.
Off
Power is off or system board is faulty.
ACT stat LED
Solid or blinking green
Solid or blinking indicates packet activity between the forwarding and routing engine and any I/O port.
Off
No packet transfers are occurring.
POE
Green
IP phone power is on.
Amber
IP phone power is not on.
PS1 / PS2
Green
System is running.
Amber
System is not running.
Figure 2 shows the back panel of the CISCO3945-SEC/K9 with slots and ports.
Note:
① Compact flash 0 and 1 (0, right) ② EHWIC 0,1,2 and 3 (0, far right) ③ B serial port ④ RJ-45 serial console port ⑤ AUX port
⑥ SFP 1 and SFP 2 (2, top) ⑦ 10/100/1000 Ethernet port GE 0/1 and GE 0/2 (GE 0/1, down) ⑧ 10/100/1000 Ethernet port GE 0/0 ⑨ B 0 and B 1 (1,top)
⑩ Ground Service module slots
Figure 3 shows security bundle.
Modularity Features
Table 3 shows recommended modules for this router.
Choosing a selection results in a full page refresh.
Opens in a new window.
Cookie Consent Popup
We use cookies to enhance your browsing experience, serve personalized ads or content, and analyze our traffics. By clicking "Allow Cookies" you consent to our use of cookie.
×
Please wait...
Make An Offer
Cisco 3945 Security Bundle w/SEC license PAK - CISCO3945-SEC/K9
£19,025.00
Cisco 3945 Security Bundle w/SEC license PAK - CISCO3945-SEC/K9
