ASR1009-X Specifications |
|
Physical specifications
Note: Depth applies to chassis edge-to-edge dimension and does not include protrusions such as card handles, power-supply handles, and cable management brackets.
Refer to the applicable hardware installation guide for additional details.
|
Height: 15.72 in. (399.3 mm)
Width: 17.2 in. (437.4 mm)
Depth: 18.15 in. (461.0 mm)
Weight:
● 50 lb empty
● 154 lb (70 kg) (with three fan modules, four AC power supplies, two power bay blanks, two Cisco ASR1000 Series 200-Gbps ESPs [ASR1000-ESP200], two Cisco ASR 1000 Series RP2s [ASR1000-RP2], three Cisco ASR 1000 Series 100-Gbps MIPs [ASR1000-MIP100], six EPA blanks, and no EPAs)
|
Default memory |
8-GB DRAM RP2
8-GB DRAM RP3
|
Number of SIPs or Ethernet line cards supported |
3 |
Shared port adapters |
12 SPA slots |
Ethernet port adapters |
6 EPA slots |
Cisco ASR 1000 Series ESP |
2 ESP slots |
Route processor |
2 route-processor slots |
Redundancy |
Hardware: Yes |
Built-in Gigabit Ethernet ports |
0 |
Built-in 10 Gigabit Ethernet port |
No |
Network interface module |
No |
Cisco ASR 1000 Series |
Cisco ASR 1009-X |
ESP support |
Cisco ASR 1000 Series 40-Gbps ESP (ASR1000-ESP40),
Cisco ASR 1000 Series 100-Gbps ESP (ASR1000-ESP100), and Cisco ASR 1000 Series 200-Gbps ESP (ASR1000-ESP200) |
ESP bandwidth |
40 to 200 Gbps |
ESP memory |
Cisco ASR 1000 Series 40-Gbps ESP (ASR1000-ESP40):
8-GB DRAM
Cisco ASR 1000 Series 100-Gbps ESP (ASR1000-ESP100): 16-GB DRAM
Cisco ASR 1000 Series 200-Gbps ESP (ASR1000-ESP200): 32-GB DRAM
|
SIPs and Ethernet line cards |
Supports Cisco ASR 1000 Series 40-Gbps SIP Carrier Card (ASR1000-SIP40), Cisco ASR1000 Series MIP 100-Gbps Carrier Card (ASR1000-MIP100), and ASR 1000 Fixed Ethernet Line Card; two 10 GE + twenty 1 GE (ASR1000-2T+20X1GE) line cards; and six 10 GE line cards (ASR1000-6TGE) |
Embedded hardware-based encryption |
Yes: On Cisco ASR 1000 Series 40-Gbps ESP (ASR1000-ESP40) with up to 11-Gbps crypto support throughput, Cisco ASR 1000 Series 100-Gbps ESP (ASR1000-ESP100) with up to 29-Gbps crypto support throughput, and Cisco ASR 1000 Series 200-Gbps ESP (ASR1000-ESP200) with up to 78-Gbps crypto support throughput |
Minimum Cisco IOS XE Software release |
Cisco IOS XE Software Release 3.16.0 |
Rack-mounting |
Yes: 19-inch |
Wall-mounting |
No |
External USB flash memory |
1-GB USB flash-memory support |
Redundant power supply |
Yes: Dual power supplies by default, expandable up to a total of six, depending on configuration and redundancy preferences; option of either 1100W AC or 950W DC
Note: A mix of AC and DC power supplies is not supported.
|
Power input |
Worldwide ranging AC input range (85 to 264 VAC)
Worldwide ranging DC
(-40 to -72; -48V nominal)
|
Power consumption |
● Maximum (DC): 5200W
● Maximum (AC): 5100W
● Maximum (out): 4575W
|
Airflow |
Front-to-back |
Operating temperature (nominal) |
Same as for Cisco ASR 1001-X |
Operating temperature (short-term) |
Same as for Cisco ASR 1001-X |
Operating humidity (nominal) (relative humidity) |
Same as for Cisco ASR 1001-X |
Operating humidity (short-term) |
Same as for Cisco ASR 1001-X |
Storage temperature |
Same as for Cisco ASR 1001-X |
Storage humidity (relative humidity) |
Same as for Cisco ASR 1001-X |
Operating altitude |
Same as for Cisco ASR 1001-X |
Network Equipment Building Standards (NEBS) |
GR-1089 and GR-63 (in progress) |
EMC standards |
Same as for Cisco ASR 1001-X |
Safety Standard |
UL60950-1
CSA C22.2 No. 60950-1-03
EN 60950-1
IEC 60950-1
AS/NZS 60950.1
|
