· SNMP and Telnet interface support delivers comprehensive in-band management, and a CLI management console provides detailed out-of-band management.
· An embedded RMON software agent supports four RMON groups (history, statistics, alarms, and events) for enhanced traffic management, monitoring, and analysis.
· A SPAN port can mirror traffic from one or many ports to another port for monitoring all eight RMON groups with an RMON probe or network analyzer.
· Trivial File Transfer Protocol (TFTP) reduces the cost of administering software upgrades by downloading from a centralized location.
· Two LEDs per port provide convenient visual indication of the port link and PoE status.
· Crash information support enables a switch to generate a crash file for improved troubleshooting.
· Show-interface capabilities provide information about the configuration capabilities of any interface.
· 1000BASE-TX ports: RJ-45 connectors; two-pair Category 5e and Category 6 UTP cabling
LED indicators
· Link status LED: One LED per port for indicating link status
· PoE LED: One LED per port system for PoE status indication
Power Requirements
Internal power supply
Optional PoE system power supply available for all Cisco 4000 Series routers
Internal redundant power supply
For the Cisco 4431 and 4451 routers only
DC power support
· DC system power input available on the Cisco 4351, 4431, and 4451 routers
· PoE option not available with DC system power input
Software support
Minimum Cisco IOS-XE Software Release 3.15 for Cisco 4000 Series routers: IP Base License of the Universal image
Environmental
Operating temperature
32° to 104°F (0° to 40°C)
Operating humidity
10 to 90 percent, noncondensing
Nonoperating temperature
-4° to 149°F (-20° to 65°C)
Operating altitude
15,000 ft (4,570m)
Regulatory compliance, safety, and EMC
When installed in a Cisco 4000 Series router, the Cisco Gigabit Ethernet LAN Switch NIM meets the standards (regulatory compliance, safety, and EMC) of the router itself. Refer to the data sheets for the Cisco 4000 Series routers for more details.
Cisco NIM-ES2-4= is a Cisco 4000 Series Integrated Services Router 4-Port Gigabit Ethernet Switch Module. The 4-port Cisco Gigabit Ethernet LAN Switch Network Interface Modules (NIMs) can reduce your company's total cost of ownership (TCO) by integrating Gigabit Ethernet switch ports within Cisco 4000 Series Integrated Services Routers (ISRs). These low-density Gigabit Ethernet switches offer small to medium-sized businesses and enterprise branch offices a combination of switching and routing integrated into a single device
Notice that NIM-ES2-4= is the same as NIM-ES2-4.
Quick Specs
Figure 1 shows the appearance of NIM-ES2-4=.
Table 1 shows the Quick Specs.
Product Code
NIM-ES2-4=
Form factor
Single-wide NIM form factor
Ports
4-port Gigabit Ethernet
Dimensions (H x W x D)
0.8 x 3.1 x 4.8 in. (2.1 x 7.9 x 12.2 cm)
Weight
79g (0.17 lb)
Platform Support
Table 2 shows recommended platforms that support the 4-port Cisco Gigabit Ethernet LAN Switch NIMs.
Choosing a selection results in a full page refresh.
Opens in a new window.
Cookie Consent Popup
We use cookies to enhance your browsing experience, serve personalized ads or content, and analyze our traffics. By clicking "Allow Cookies" you consent to our use of cookie.
×
Please wait...
Make An Offer
"4-port Layer 2 Gigabit Ethernet LAN Switch NIM - NIM-ES2-4="
£670.97
"4-port Layer 2 Gigabit Ethernet LAN Switch NIM - NIM-ES2-4="
